DriveHUD - Poker HUD & Database Software [-10% Discount]

We use standard positions for each table size. Those are consolidated for positions over 6. UTG+1, 2, etc... = UTG, and so on. You can use (MaxPlayers = 6 and FirstRaiserPosition = MP1) or (MaxPlayers = 9 and FirstRaiserPosition = MP2) in your custom stats, and add those to reports. It won't show in the vertical for the positions report, you'd need to add it as a specific stat for VPIP, PFR, etc...

Did you email support? If you just email them they will take care of you.

It's something that I already went through with support and would like your opinion on it aswell. Why even have this thread if that's the case?

Hey FreakyDaddy,

I look out for some more information on DriveHUD.

PT4 becomes limited to my needs and Hand2Note is to expensive.

For the current state of my game I want to establish MDA studies on my pool.

So my question would be, is DriveHUD be able to import my PT4 Database in the first place and if yes, can I do some specific study on my pool?

Example: how many times did a certain Player bluffed on the River or bet for value?

Can I see the data of how many times the pool bluffed on the River? And If possible, can I also then look at the replayer of single hands in these reports?

Thanks in advance!

I hear you.

Yes, you'll be able to import your pt4, no issue. You'll just import from the hand archive folder into dh2.

As far as mda and population study, yes, you'll be able to do a ton here. There's two different range reports you can use. There's a population report that you can add stat too, including custom stats.

Also the r&d reports, you can look at spots for yourself, alongside how each player type performs. There's lots of options. I'll post up some specific ideas when I have a bit more time. I'm not in office right now.

Hey that sounds great. I downloaded it for 30 days trail. I try to figure out. But I would appreciate still a response. Cause I am new to it.

How come the HUD on ignition is separated into 2 different boxes by default? Is there a quick option to set everything in 1 box or do I have to do it manually?

Try checking their KB page and video tutorials.
https://drivehud.com/dh2-knowledge-base/
https://drivehud.com/drivehud-2-univeris...

For sure. I'd start w/ some of the vids in the library, like the R&D builder for example.

https://drivehud.com/drivehud-2-univeris...

I'm not at my main system, otherwise I'd send you some more specific ideas, but I'll update in here when I am.

I think you mean the default ignition HUD, and it's because it's 2 different elements. A lot of HUDs will typically have 2-5 different elements in them. You can move them all together by right click and dragging them. They will move as one, or left click and move them separately.

Hi!

Are you adding someday a BBJ fee for GGPoker hands?

I would like to see real rake (how much house cuts from a pot)

For now, this is an 1 hand example how DH2 excludes the bbj fee

In this example, player paid $0.81 ($0.56 + $0.25) rake instead of DH2 calculated rake stat "$0.26"

I'm not sure, I'd have to speak to the dev team. I know they add whatever is available. If the data is sent now (because I believe it wasn't previously), then they'll add it of course. I've sent them a message, so I'll let you know. ty.

So just some quick advice. If you want to study specific player data, you'll use the opponent report. Click on the config icon next to the report, and you can add specific players to that report to study. You'll also want to right click on the header column and add any stats you want to look at, like bluffed on the river or value bet. The only tricky thing about both of those stats is obviously you need to be on a site that forces shows at showdown. Ignition is perfect for this if you're on there.

And as far as population reports, same thing as far as adding the stats you want, right click on the column header. And then yes, any player type you add to that report, if you click on them it will populate your hand history grid on the right, so you can replay or view those hands, tag them, etc... You can also add your own defined player types in the population report by clicking on the config and defining the stats of the new player.

And then something I like doing is comparing my data vs population graphically in some R&D reports. I can see where I deviate easily vs winning TAGs, LAGs, or how far off fish are in certain areas.

Hope that starts pointing you in the right direction.

Hey FD.
It looks like I need to use a VPN. Which works well with DH2?

Hi,

It seems impossible to create a custom stats based on hand strength. Do I miss something ?

Thanks

I would also like some hand strength custom stats as well as the more common terms that are used in the 'normal' stats.

PFR and RFI come to mind. Maybe if you could use the normal stats (and previously created stats) in the definition of a new stat. An example would be did PFR / could PFR.

FD suggested HMA or nordvpn on AHC thread.

Yes, the only issue w/ hand strength is... it's almost impossible to know. Unless you have massive samples on your opponents, you'll rarely have enough showdown value to know any relevant data. But it is something the dev team is going to add. It's been discussed several times. There are some related custom stats like, IsRagFlop and IsPreflopBluff, IsFlopBluff, IsTurnBluff and IsRiverBluff.

People seem to have the most success w/ HMA, but nord is also popular.

DriveHUD 2 Beta Update - v2.0.17.13340

https://drivehud.com/poker-hud/DriveHUD2...

Fix for the PokerKing and its skins update (PC version only)
Fixed an issue where BB ranges were not displayed correctly after one was deleted in the user pop-up designer
Fixed an issue where the selected tool was updated incorrectly when a stat was moved down in the selected stats listbox
Fixed minor UI issues

I'll try that. 😀
Also, Ty for the update.

Hi,
I’d like to configure DriveHUD 2 to use three distinct HUD profiles and stat pools based on the number of players at the table:

Heads-up (2 players): Use my 2-max HUD and keep a separate stat pool for HU only.

Short-handed (3–4 players): Use a specific HUD and merge stats for 3- and 4-handed play.

Full ring (5–7 players): Use another HUD and merge stats for 5 to 7-handed situations.

Currently, DriveHUD automatically splits HUDs and stats per table size, which makes it difficult to analyze ranges properly.
How can I set this up with Auto Profiles or other settings?

Thank you in advance!

Correct, and the table size change has pros and cons, but it's going to be changed in the future.

For now, turn on auto switch HUD from the general settings by clicking on the settings icon at the top right in dh2.

Go to your HUD tab, and from the two pull down menus, select the HUDs you mentioned, one at a time. Click on the settings icon next to selected stats, and set a HUD filter for 3-4 players, and for full ring, 5-7 players. This should then auto switch to the HUDs as the tables change, and set filters to only show data for each player filter.

What is the definition of IsRiverBluff? Where to find it (or best adjust it) ?

I'll have to check w/ the dev team tomorrow, but I believe it's any non made hand. It may include bottom pair or second to bottom, but I'll verify and let you know.

It's a custom stat expression, so it's what you'd enter into the custom stat section (top right in filter menu).